 |
Fiber Splicing Tube 60MM
BN-100FBC308 |
| |
Description:
Bestnet offers a wide selection of fiber protection sleeves to meet any application. The FP series is the industry standard for durable and lasting protection of single fiber splices in field installations, while the fiber sleeve provide the same durable protection for 8 and 12 fiber ribbon respectively.
|
|
| |
>>Specifications : |
|
| |
| » |
Wholesale 60MM fiber heat shrink tube fiber splicing tube fiber optic hot melt tube fiber optic tube 1500pcs |
| » |
Fiber heat shrink tubing, A-level, a pack of (100) A grade per root length 60MM. |
|
|
| |
| |
| |
>>Fiber heat shrink tubing consists of the following: : |
|
| |
| » |
Enhanced stainless steel wire (made by precision interrupted, mechanical chamfering processes diameter of 1.50 × 55) |
| » |
Heat shrinkable tube (diameter 3.55 × 60) |
| » |
Hot melt tube (diameter 2.25 × 59 inner diameter of 1.5) |
|
|
| |
| |
| |
>>Structure and Characteristics : |
|
| |
| Specially designed by the cross-linked polyolefin, hot melt tube and enhanced stainless steel wire fiber splice protection components. |
| » |
Does not affect the characteristics of the fiber optic light guide. |
| » |
The protection of the splice points, to improve the mechanical strength. |
| » |
Simple operation, reduce the risk of fiber damage during installation. |
| » |
The transparent casing, so that the fiber connection status at a glance. |
| » |
The sealing structure continue to have a good resistance to temperature, humidity performance. |
| » |
Operating temperature: -55-60 ° C |
| » |
The contraction temperature range 90°C-110°C |
|
|
| |
| |
| |
>>Technical specification : |
|
| |
| » |
Properties Test Method Typical Data |
| » |
Tensile strength (MPa) ASTM D 2671 18 |
| » |
Elongation at break (%) ASTM D 2671 700 |
| » |
Density (g/cm2) ISO R1183D 0.94 |
| » |
Dielectric strength (KV / mm) IEC 243 20 |
| » |
Dielectric constant IEC 243 2.5 |
| » |
Length variation rate (%) ASTM D 2671 +5 |
|
|
| |
| |
