Our Product Offerings > Copper Networking Products > Active Products
 Wire Tracker

 

 
 
 
 
Network wire Collation Function
 
  1. Insert RJ45 plug at two ends of the network wire into the corresponding sockets at emitter and receiver.

  2. Push function switchover button on emitter to the position of "TEST", testing indicator "VERIFY" flashes meaning normal work of emitter.

  3. According to 16 wire sequences, judge the characteristics of short-circuit, breaking circuit, open circuit and crossing.

  4. During testing, function switchover button can be pressed for switchover of fast and slow levels.
 
     
 
Electric wire Finding Function
 
  1. Directly insert telephone wire with crocodile clamp and RJ11 plug into the RJ11 socket of the wire tracker's emitter.

  2. Push DIP switch of emitter to position of "SCAN" then wire finding indicator "STATUS" flashes meaning normal work of emitter.

  3. Press downward the inching button, use the probe of receiverto find target wireat the other end.

  4. During testing, function switchover button can be pressed for switchover of dual-tone.
 
Specification of Product
Item Specification
Product name Wire tracker
Power supply DC, 9V battery
The max working current
Emitter <=10mA
Receiver <=30mA
   
Signal transmission format Multi-frequency impulse
Signal output electric status 8Vp-p
Distance ofsignal transmission >=3km
Appearance dimension
Emitter 126x49x34,mm
Receiver 175x42x27,mm
Whole Set 270x165x45,mm
Weight
Emitter 0.060kg
Receiver 0.072kg
Whole Set 0.420kg
 
  >> Open circuit or short circuit testing function  
  Push DIP switch on emitter to position of "TEST" , and long press function switchover button on emitter for2 seconds, "VERIFY" indicator will change "flash" to "lighting" insert the crystal plug with crocodile clamp into RJ11, clamp the two ends to be tested with crocodile clamps, in case of short circuit, "1 " -shape indicator of emitter will light up, otherwise it will not light up, resistance ofthe line can be indicated be brightness of
status indicators: the lighter the indicator, the smaller the resistance; the darker the indicator, the bigger the resistance.
 
  >> DC level testing function
 
  Push DIP switch on emitter to position of "SCAN " , and long press function switchover button on emitter for 2 seconds, "STATUS" indicator indicator flashes, insert the crystal plug with crocodile clamp into RJ11, clamp the two ends to be tested with crocodile clamps, in case that "STATUS" indicator lights up in red , it means the end clamped with red clamp is positive pole, in case that "STATUS" indicator lights up in green, it means the end clamped with red clamp is negative pole, electric level can be judged by brightness of the status indicators; the lighter the indicator, the smaller the resistance; the darker the indicator, the bigger the resistance.

 
  >> Low voltage alarm function
 
  Push DIP switch on emitter to position of "SCAN " , in case that battery level is lower than 6.0V, "STATUS" and "VERIFY" indicators will light up
at the same time, it means battery replacement is needed.

 
  >> Earphone function
 
 

ln noisy environment, earphone can be used to prevent interference from the outside.

 
  >> Volume adjusting function  
  While find the wire, volume knob can be rotated for moderate level of sound.
 
  >> Spotlight function  
 

You can easily work as usual while putting on the light switch at night and in the dark.

 
  >> Energy-saving  
  lnching switch can automatically delay power-off.
The continuous lifespan of battery is over 50 hours.

 
 

copyright @ 2010 Bestnet   Contact Us | Business Enquiry | Sitemap | Home