|
HDMI Switch 8 in 1 out - 4K@30Hz
( BNHDMI-0801A10SW-232 ) |
|
>>Description : |
|
|
The 8 ports HDMI switch BN-0801A10, allows up to 8 Ultra HD sources to be routed to one Ultra HD display. Support resolutions up to 4K (3840 x 2160 @ 30Hz). Deep Color, 3DTV pass-through, and lossless audio formats such as LPCM 7.1, Dolby TrueHD, and DTS-HD Master Audio are also supported. Support automatic input source detection, when attach new input device to the switch, the switch will switch to last plugged in source automatically.With EDID emulators in every input ports, keep PCs always have correct display information, prevent display settings changed while switching input ports.
|
|
|
|
| |
|
>>Features : |
|
|
» |
With EDID emulators in every input ports, keep PCs always have correct display information |
» |
Support hot plug, connect or disconnect devices to the HDMI switch in any time and without turn off devices |
» |
Support auto switching to monitor computers in a specified time interval |
» |
Support front panel buttons, IR signals, RS232 serial commands or IP commands to control HDMI switch |
» |
Support resolution up to 3840*2160@30Hz 4:4:4 |
» |
Auto input detect and switch |
» |
Support DVI-D single link sources and displays with the use of HDMI-to-DVI adapters |
|
|
|
| |
|
>>Specification : |
|
|
HDMI 8x1 Switch |
BN-0801A10 |
Functionality: |
Auto Scan |
Yes |
Port selection |
Front panel buttons - Yes
Keyboard hotkeys - No
Console commands - RS232/IP
IR remote control - Yes |
Technical: |
Max. Resolution |
3840x2160@30Hz 4:4:4 |
Auto to get EDID |
Yes |
Data rate |
10.2 Gbps |
Auto scan interval |
5~3600 Seconds |
Beep Sound |
On/Off |
OSD |
No |
Console ports |
RS232 -1*3 Pins jack
LAN (TCP/IP) -1* RJ45
IR extension input -1 * AUX |
Input |
8 * HDMI Type A |
Output |
1 * HDMI Type A |
ESD protection |
Human body model - ±8kV (Air-gap discharge) |
Mechanical: |
Chasing material |
Metal |
Product dimensions |
440 (L) x 150 (W) x 44.5 (H) mm |
Item Weight |
1480g |
| |
|
|
|
|
>>Includes : |
|
|
Panel Description :
1. IR receiver extension cable input
2. DC 12V Power Adapter
3. 3 Pins jack for RS232 console
4. HDMI output port
5. HDMI input ports
6. Auto scan time interval settings
[MIN]: Press button [MIN] to loop between 0~59 minutes.
[SEC]: Press button [SEC] to loop between 0~59 seconds.
[Set]: After setting minutes and seconds by buttons [MIN] and [SEC], press button [Set] to enter final scan time interval setting.
7. Status indicator:
Green LED: Normal status
Red LED: Auto scanning mode
8. IR receiver
9. LED display: display current selected input source
10. Keypad:
[1~8]: Press these buttons to directly select input 1~8 sources.
[Close]: Press this button directly will turn on or turn off the display out
[Scan]: Press this button to start or stop automatically scan between input 1 to input 8 . The interval time can be set by buttons [Set], [MIN], [SEC] as described above.
11. LAN: TCP/IP console interface
12. Power switch: Turn on or off the power.
|
|
| |
Connection Diagram :
|
|
|
|
| |
|